TECEbox Octa II Cistern for Floor Standing Toilet

Despite an installation depth of just 8 cm, the TECE Octa cistern makes no compromises with the flushing technology. No compromises: because with a water volume of 9.5 l, even the Octa cistern always provides sufficient residual volume for a direct follow-up flush.

Designed and Manufactured in Germany

• Octa II cistern including “easy fit” flush plate installation for floor standing toilet; depth 8 cm; for installation in or in front of a solid wall.

Octa II cistern 8 cm for front actuation:
• Safety tank made of impact-resistant plastic, tested to DIN EN 14055
• Cistern fully pre-assembled and sealed
• Cistern connection with outer thread R l/2″ at the top, compatible with quick adapters
• 7-litre tank volume; 6-litre pre-set standard flush volume; 4.5-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; optional setting of a 4/2 litre flush volume possible.
• Insulated against condensation water
• for TECE flush plates and toilet flush handle
• Can be used as a single or dual-flush cistern
• “easy fit” flush plate installation
• Installation tunnel for service opening, can be shortened without tools
• Quiet hydraulic filling valve, acoustic group l in accordance with DIN 4109
• Flush pipe connection set

Note:
Surface mount: minimum 10mm between cistern and external wall lining required depth (ie: AquaGib + tiles)
Flush mount: minimum 25mm between cistern and external wall lining before finished wall. 9.240.64x sits between external wall lining and finished wall lining (ie: 2 x 13mm AquaGib then recessed frame then tile)